Adriean Koleric's Herd of AT-ATs is a salute to the designers of a toy that was truly a piece of art.

The lost city of Atlantis could well be at the bottom of any body of water, if it is really made out of plastic containers, the way Gayle Chong Kwan sees it.

Madrid's Spy lightens the urban panorama with his signature interventions.

Antlers are certainly not over. Not when they are on Alessandra Exposito's horses, at any rate.

Si Scott's intricate pen and pencil drawings cover a wide range of themes. Shown above is part of a piece called Babel, in answer to a project on God.

More at Art MoCo.

When it comes to mobiles, everyone knows that they can make great nursery decorations and playthings for babies, but sophisticated, abstract mobiles can also function equally well as artsy decor for grownups. Such is the case with Frazier & Wing’s beautiful recycled magazine mobiles. Made from hundreds of paper cut-outs from old magazines, and strung in linear cascading forms, Frazier & Wing’s chandelier-esque mobiles make a stunning centerpiece for any room: nursery or grownup.

READ MORE AT INHABITOTS >

In general I find the conferences organized by Trendbüro Hambug quite corporate and too often the same players (aka speakers) show off. However Tim Leberecht from frog design pointed me to a slideshare summary on the key findings of the German Trend Day 2008 conference. Have a mind on your own and browse the slides: "In May this year, frog design founder Hartmut Esslinger spoke at the German Trend Day in Hamburg. The Trend Day is an influential annual forum that gathers thought leaders from business, media, and academia to discuss emerging social and cultural trends. This year's theme was "Identity Management," and other speakers besides Hartmut included Richard Florida, Danny Choo, and David Bosshart."

I have gotten the following information from a Canadian inventor who claims some pretty amazing attributes for a product that he calls "New-crete." While it is not yet available, it has the potential to become one an amazing manufactured technology that addresses many issues related to sustainability. See what you think:

I have a patented product of lightweight cement called new-crete. New-crete is designed to form millions of air bubbles when cured. This makes new-crete 50% lighter and stronger than regular cement and 35% lighter and stronger than lightweight cement. It is also 30%-40% cheaper than regular cement. It has an R-20 insulation value with a 9-inch thick wall. It is nontoxic and not corrosive and it floats.

• Price: regular cement , $125 per cubic yard; new-crete, $75 per cubic yard
• It has the ability to shed water with a .5 mm saturation point. this will prevent water seeping into it and freezing causing cracking.
• The ingredients to make New-Crete are readily found around the world and are in no danger of being depleted.
• New-crete can be formed into any object. We have the designs for walls, drywall, floors, shingles, stairs, window frames, cupboards, bricks, doors ect....we can make a whole house from the bottom up using only New-Crete
• It can be painted, or laminated with wood panels, ect.
  
• It can be nailed into and not crack.
  

It is designed to be processed in a controlled environment so it can not be poured. That is why we need a $2 million processing plant to start manufacturing pre-fab homes then ship them by train or boat anywhere in the world. Before that, we need about $150 000 to build a prototype home so we can get it approved by CSA (Canadian Standards Association).

Once this is up and running we can start supplying the world with better, cheaper homes. The plans for the prototype home is for a regular box style home. The next step will be to make in-ground and underground domes that are storm proof. They will also be cheaper and strong than regular homes with revolutionary designs...100% self sustainable.

The Canadian north (native reserves) are in much need for about 35 000 new homes as the old ones are in 3rd world condition.

So I know this will be better for everyone, especially the trees. This will change the world. All I need to do is find $150 000 to get it started. I see many people with lots of money (US government spending trillions on war) and the Canadian government also spending money on war ect...the will to change the world is the first key; money will then come naturally.

I believe we must start using other building materials instead of trees before they are all gone. If interested you can contact Matthew Smyth at infiniteearthdesignATyahoo.ca or visit his website: www.InfiniteEarthDesign.com

As the climate crisis mounts and Arctic icebergs slip away, polar bears are suffering starvation, population declines, and drowning as they must swim further and further to find food. Seeking to raise awareness for the endangered species’ plight, ADDI Concepts has taken wildlife preservation literally by designing a life-vest for displaced polar bears struggling to stay afloat as their homes sink into the sea.

(more…)

A week ago or so the good folks at DO Research posted a nice pic of a new weeHouse they drove by. I think it must be the Oeschger house shown on the Alchemy site. Sure looks like it.

I've never been to the Twin Cities but it occurs to me that most of my favorite modernist architecture and related firms and websites are based there:

DO Research - A favorite Minneapolis-based modernist blog
rosenlof/lucas - the hippest modern landscaping duo going, with a cool blog to boot
Alchemy Architects - you cannot resist the appeal of their weeHouses
Flatpak - I drool over these Eamesish beauties
City Desk Studio - recently in Dwell, awesome Skyway Retreat
Bark Design - I'm in love with Doris
Hive Modular - The B-Line is an instant classic modern prefab

What is it about Minnesota????? So much good stuff is coming out of there right now. It makes me want to move. I think a weekend trip to finally see the Twin Cities is in order.

This is it! There are only a few items left to complete and correct in the New Mexico EcoSteel House. The owner has their CO and is moving in. They sent along one last round of photos of the empty house taken with a very wide angle fish-eye lens.



More of the photos in a photo browser after the click-through.



So this is it. Perhaps we will see some photos of the place with furniture, but this project is coming to a close. Its been very exciting to see it come together, and the owner has been very generous with their photos. Our thanks to them for sharing their house with us, and you our readers.

Technorati Tags: 3030 House, 6030 House, 6040 House, ecosteel, modern design, modern house, prefab house

For more than a year the use of illustrations in order to ideate and visualize innovation both in products and services has been part of my Design Management seminars. While preparing for the international version of this seminar in Lucerne/CH in November this year together with my colleague Erik over from http://www.zilverinnovation.com I've been happily stumbling across Google's announcement to release a new G-branded browser built from scratch. However it wouldn't be Google if they would have chosen the ordinary road of explaining innovation with plain fact sheets. Instead they've chosen the format of a 'Comic' in order to illustrate the new approach and rich features of the web browser. Thanks to Scott McCloud I do now have a new (and better) example of great use of illustrations for business purposes.

'blinds'

analia segal

argentinean artist analia segal winner of designboom's 100% tiles competition in 2004,
is currently holding her first solo exhibition at the dpm gallery, ecuador. with all her work
segal creates objects and interiors that are often taken for granted and transforms
them into art. featured in the exhibition are blinds, wallpaper, tiles and doormats that
blur the line between architecture and art.


'w.c. tile project'

more:
http://www.analiasegal.com
http://www.dpmgallery.com

I should share some snippets from last Friday when I’ve joined several of my peers in The Hague, NL. However please allow for some digesting of my impressions and thoughts! I will write a follow up for sure ;-)

After all what we’ve touched in our panel discussion as well as during the ‘after show’ talks has been (amongst others) the question how to best enter the ‘Design Management Sphere’. From regular email conversations as well as face2face talks this seems to be an urgent question in particular for fresh (design) graduates.

What I usually respond (and this is not meant as ‘fobbing off’) is that independent from their focus of study (let it be design or business administration just to name the two most dominant ones) graduates should try to gain as many and rich experiences in their field of profession as possible. This enables them to comprehensively explore the pros and cons of the field and will help them to render more precisely which domain of the Design Management sphere they are most interested in: Digital, Brand, Corporate, Industrial, Consumer, Services, just to name a few.

Ultimately and this is what I truly believe in: Design Management to a large degree is to a large degree nurtured by the application of (for sure!) cross-disciplinary experiences and skills that tend to rather grow over time. This does however not mean that undergraduate BA & MA programmes in Design Management are not useful. This is however a different discussion to be discussed at another time.

So, for those of you who are seeking for these cross-disciplinary experiences delivered in a highly condensed format you might want to have a look at the MoHo Website. Here’s a snippet from their vision statement:

“Innovation is hampered by a myriad of factors in today’s globalised world. The lack of communication between knowledge centers such as engineering, marketing and design in companies, creates distortions and miscomprehensions between people that heavily penalize the innovation process.

These problems are further amplified if economic reality is brought into the picture. Too many products have been ‘invented’ in the past with little or no potential for economic success. ‘Inventors’ very easily forget the importance of market reality.”

Unfortunately I haven’t been aware of this initiative and hopefully they will share some of the findings publicly soon!

Side note:

These are the facts & figures of the event I do miss more designers here for sure:
# 7 days in Palo Alto
# June 1 - June 8
# 1 house
# 16 partners
# 15 endorsements
# 15 engineering students
# 3 design students
# 15 business students
# 10 social entrepreneurs
# 10 artists
# 5 venture capitalists
# 2 design professors
# 3 business professors

Well, we all need to tweak our presentations from time to time, right? ;-) Anyway even though most hints are not rocket science at all it's good to have them written down in order to be remembered; take me at my word!

Talk about bending over backwards to please someone! This hybrid flexible kitchen faucet from Paini is all about pleasing you with its futuristic design, ergonomic shape and utility that makes it simply delightful. This irresistible kitchen faucet is flexible enough to make all your tasks easy and simple and ensuring that you can reach wherever you want with it. The design is elegant, modern and perfect for that “space-age kitchen”. Adding to the whole coolness, it sports LED indicators that illuminate to signify water temperature. The faucet is available in black, white and gray. - via HomeDosh

a

Futuristic hybrid Faucet from Paini: Bendy and Trendy!

The video above shows some of the work from the ongoing Helmut Lang exhibition called “Alles gleich schwer”. You can experience it both in real life at renowned kestnergesellschaft in Hanover and online at the collaboration partner Absolut.

Andra bloggar om: konst, mode, helmut lang, absolut, utställning

Some links to workshops and seminars the Hong Kong Design Centre will be offering in London in June; just in case you're around the corner.

I just wanted to take a minute to share a little furniture shopping experience I had this week. I have two small children, Owen (5) and Parker Jane (3). P.J is way overdue on getting out of her crib, and Owen needs a bed frame to spruce up his room. We've been putting off a lot of other furniture purchases in order to save up and buy some nice beds for the kids. The time had finally come.

We wanted something modern and cool, and a little more substantial than a regular "kids bed." There are a lot of neat beds on the market but the modern offerings tend to be really pricey and are too often the kind of thing that will look silly in your kids' rooms by the time they're ten. My wife and I finally settled on a pair of these great-looking platform beds from TrueModern. They cost more than we wanted to pay, but were priced reasonably compared to a lot of other modern offerings on the market (many not as nice), and I think they look great, look well made, and will last the kids a long while.



Now, you can get these from a lot of places but for whatever reason we ordered ours from Design Public. I'd never bought anything from them before, but I'm one of those people who shops online a lot and it's not a really big deal for me to try a place completely new, even for a big purchase - throw caution to the wind, reckless abandon, all that jazz. I really don't recall why I picked them for my order.

So anyway, the beds get ordered, it takes about two weeks for them to ship, and then I get the call from the freight company who will deliver them. Long story short, there is a problem, possibly some confusion, and I am concerned about it. The problem was the freight company, not Design Public or TrueModern, but rather than tackle it solo I decide to call Design Public for help.

I must say, I was absolutely impressed by the extremely friendly and helpful response. I won't get into the details, but I thought that the Design Public staff went above and beyond the call of duty in helping me. I spoke to Jonathan, who was unfailingly courteous and diligent in his follow-up on my issue. I felt like they really cared, that I was valued as a customer, and that Design Public genuinely wanted to take care of me. It was really nice!

Like I said, I shop online a lot without giving it much thought. And I guess I've learned not to expect too much. But really, I thought Design Public were wonderful to deal with. If you want some really cool modern stuff, check out their site. It is loaded with amazing furniture, accessories, lighting, gifts, etc. - you name it. Very nice. It's a small company that's really living up to its mission. I was totally impressed.

Bravo and thanks!

Image credit - Design Public site

Hookaboo is a discreet wall hanger that you can have in the hallway, bathroom, bedroom or anywhere you wish. This wall hanger has 4 pieces of metal hanger that fold up when are not used. Designed by Matt Carr, this wall hook is made from bamboo and is 34 cm wide, 8,5 cm hight and about 2 cm deep. For those of you interested in this product, you can purchase it from Bluebox ( Sweedish shop ).

a

Hookaboo Wall Hanger by Matt Carr

The work on the interior of the New Mexico EcoSteel House is progressing. Today we share more photos taken by the owner.



Click through the link below to see a photo browser with more images of the interior and the site.

Technorati Tags: 6030 House, 6040 House, ecosteel, modern design, modern house, prefab house

"Herzog & de Meuron's Tenerife Arts Space (TEA) has been inaugurated in Santa Cruz de Tenerife in the Canary Islands." (via BD)

The idea of making walls by stacking bags of sand or earth has been around for at least a century. Originally sand bags were used for flood control and military bunkers because they are easy to transport to where they need to be used, fast to assemble, inexpensive, and effective at their task of warding off both water and bullets.

At first natural materials such as burlap were used to manufacture the bags; more recently woven polypropylene has become the preferred material because of its superior strength. The burlap will actually last a bit longer if subjected to sunlight, but it will eventually rot if left damp, whereas polypropylene is unaffected by moisture.

Because of this history of military and flood control, the use of sandbags has generally been associated with the construction of temporary structures or barriers. Using sandbags to actually build houses or permanent structures has been a relatively recent innovation.

It was an Iranian-born architect named Nader Khalili who has popularized the notion of building permanent structures with bags filled with earthen materials. Actually his first concept was to fill the bags with moon dust! Attending a 1984 NASA symposium for brainstorming ways to build shelters on the moon, Khalili coupled the old sandbag idea with the ancient adobe dome and arch construction methods from his homeland in the Middle East. He realized that bags filled with lunar “dirt” could be stacked into domes or vaults to provide shelter.

Khalili came up with a further refinement on this building concept on Earth: for a more permanent, shock-resistant structure, why not place strands of barbed wire between the courses of bags, thus unifying the shell into a more monolithic structure?

At first Khalili was filling his experimental bags with desert sand, but then he evolved his idea of “superadobe,” where bags or long tubes of polypropylene bag material would be filled with a moistened adobe soil that would dry into large adobe blocks. In this case the original bag material was merely the initial form and would not necessarily be an integral part of the eventual structure.

Soon after these first experiments, Khalili began publicizing his work through newspaper and magazine articles and conducting workshops and seminars on the techniques that he was perfecting. Many people who read about his work, visited his compound in Hesperia, California, or studied with him there, decided to go ahead with their own experiments with his ideas.

Among these “early adopters” were Joe Kennedy, Paulina Wojciechowska, Kaki Hunter and Doni Kiffmeyer, Akio Inoue, and Kelly Hart. I believe that it was Joe Kennedy who coined the more general term “earthbag” to suggest that the bag could contain a variety of earthen materials.

Paulina Wojciechowska was the first to write an entire book on the topic of earthbag building: Building with Earth: A Guide to Flexible-Form Earthbag Construction was published in 2001. This featured some of her early experiments done at Khalili’s CalEarth, along with several other case histories.

Akio Inoue, from Tenri University in Japan, has done extensive experimentation with earthbag construction, both on the campus of the University and in India and Africa where many other domes have been built for assistance programs.

Kaki Hunter and Doni Kiffmeyer (a couple) became enamored with earthbag construction after studying with Khalili, and worked on a variety of projects, both for themselves and for clients. In 2004 they wrote and got published another book, Earthbag Building: the Tools, Tricks and Techniques, based on their particular experience.

Kelly Hart (the author of this article) first began experimenting with earthbag building in 1997, after being exposed to the concept while producing his video program, A Sampler of Alternative Homes: Approaching Sustainable Architecture. He later documented his experience in actually building his own home in another program titled Building with Bags: How We Made Our Experimental Earthbag/Papercrete Home. Both of these programs are now available as DVD’s.

In the meantime, Nader Khalili was continuing the promotion of his “Superadobe” technique and eventually decided to patent the idea, which he obtained in the U. S. in 1999, using very general terms that cover using bags made of any material being filled with virtually any material, and combining these with barbed wired between the courses. While having made many public statements that this concept was his gift to humanity, he obviously wanted to capitalize on the potential economic reward.

Many of us who had been engaged in promoting earthbag building on our own were contacted by Khalili and asked to enter into contracts with him in order to continue our work. It didn’t take much research to discover that his patent could easily be disqualified because he had been publicizing his techniques through various media for at least four years before he even applied for his patent. Patent law clearly states that such publicity occurring prior to one year before the patent application would disqualify it for consideration.

So now the door is wide open for anyone to take this concept and run with it, and more people are doing so all the time, all over the world. While Khalili (and most of his students) have focused primarily on using the bags to form large adobe blocks, others have tried filling the bags with a variety of other materials, such as crushed volcanic rock, crushed coral, non-adobe soils, gravel, and rice hulls.

Earthbag building is unique among all other building technologies in that it can be either insulation or thermal mass, depending on what the bags are filled with. This is a very important distinction, because these characteristics of a wall greatly influence how comfortable, economical, and ecological any given system will be.

Safety is of prime concern with all building technologies, and much experimentation and testing has been done to establish guidelines for many ways of building. Khalili has established a relationship with the building department in Hesperia, California where CalEarth is located, an area where earthquakes are naturally a great danger. In 1993 live-load tests to simulate seismic, snow and wind loads were performed on a number of domed earthbag structures at CalEarth and these exceeded code requirements by 200%.

In 1995 dynamic and static load tests were performed on several prototypes for a planned Hesperia Museum and Nature Center to be constructed using Khalili’s Superadobe concepts with both dome and vault shapes. All of these tests exceeded ICBO and City of Hesperia requirements.

In 2006, at the request of Dr. Owen Geiger of the Geiger Research Institute of Sustainable Building, the Department of Civil and Mechanical Engineering of the U.S. Military Academy at West Point conducted several controlled and computer-monitored tests to determine the ability of polypropylene earthbags filled with sand, local soil, and rubble to withstand vertical loads. Their written report concluded that “overall, the earthbags show promise as a low cost building alternative. Very cheap, and easy to construct, they have proven durable under loads that will be seen in a single story residential home. More testing should prove the reliability and usefulness of earthbags.”

Despite the success of these tests, earthbag building concepts have yet to be incorporated into the International Residential Building Code. Obviously more enlightened acceptance of the demonstrated viability of earthbag building needs to occur!

It is difficult to know how many residences and other earthbag structures have been made at this point, probably hundreds if not thousands. Many of us have been promoting the technique for use as emergency shelters, and certainly some have been built for this reason. It is easy for folks to accept this way of building temporary shelters because it fits the historical model of sandbag use.

But many of us have also built substantial homes using earthbags, and in the process realized how truly versatile and sustainable the technique is. I wouldn’t be surprised if many of these earthbag homes are still standing long after their conventional counterparts built contemporaneously have disintegrated.

There is a manufactured building system that has been gaining popularity in Europe for several years called Thermoplan or Zeigel Blocks. While I have no personal experience with this technology, I can readily see its many advantages. As far as I know this system has not made its way across the ocean to North America. From what I can gather from the websites (referenced below), here are some of the advantages:

Thermoplan or Zeigel Blocks are fired clay blocks which use about 1/3 less energy to make compared to concrete blocks, and about 2/3 less CO2. They are fast, simple and ideal for a self builder to use. About 50% of German homes are made this way and the technology is spreading to other areas of Europe.

Thermoplan systems use Ziegel blocks with a thin bed of mortar, to provide a breathing wall construction system. When combined with woodfibre board they can form a thermally and acoustically high performance shell. The Ziegel blocks come as part of a full load-bearing external and internal wall masonry system, and combine high thermal performance with robustness, speed of build and a breathing wall design.

Because of all the trapped air and the thickness of the walls, these blocks provide reasonable insulation, while at the same time do provide some degree of interior thermal mass for maintaining constant interior temperatures. This is an unusual combination of these two factors in a single wall system.

See www.burdensenvironmental.com or www.natural-building.co.uk for information for this innovative system.

Mainly through the efforts of Illiac Diaz, a charismatic entrepenuer/actor/model/athlete, the Philippines has been home to some very innovative public works utilizing earthbags. Illiac discovered the benefits of this technology several years ago at Nader Khaili’s CalEarth Institute in Hesperia, California, and has been promoting earthbag building in the Philippines ever since.

Diaz is the Executive Director of My Shelter Foundation which has collaborated with various other governmental and industrial organizations to build new schools and clinics throughout the Philippines. He is quick to point out the many economic and sustainable advantages of this method of building, since the main component is abundant and natural earth. In hurricane-prone areas, such as the Philippines, earthbag buildings can withstand the ravages of nature better than most other systems. And with thicker walls, they are more thermally stable.

Here are several pages where you can find out more about the humanitarian works of Illiac Diaz: earthbagbuilding.com/articles/filipino, earthbagbuilding.com/projects/school, earthbagbuilding.com/projects/clinic.

Franco Marino Cagnina's Livebox router design for Saudi Telecom looks like vase and acts like a router. Says Franco, "STC was in need of a unique router design that would provoke a positive emotional response. The STC Router successfully bridges the gap between lifestyle and technology with it's flower vase functionality. Wireless internet, Voice over IP, land line telephone and wired DSL are all incorporated into this elegant device.". A quick look at Franco's portfolio revealed a few more innovative designs.

+ cagninadesign.com

Books are very important to me. I'm one of those people who would rather sit at home reading than go to a party. I get lost in stories, and read coffee table books over and over again, scanning pictures repeatedly to glean every last detail. Books are good friends. They deserve good homes.

The Maison de Verre in Paris (via NY Times via rolu|dsgn). This house is absolutely brilliant.



The Upcher house by Bates Masi Architects (via DO Research). Beautiful.



Mill Valley Straw Bale Residence by Arkin Tilt Architects - the entire main inner wall is one great bookshelf and art gallery.

Tactile surfaces are making technology and information much more accessible to people with visual handicaps

As a range of new interfaces and surfaces for digital devices are developed, it is becoming easier for visually impaired people to use devices sighted people take for granted. Tactile displays enable digital data to be felt rather than seen, making it easier for blind and partially sighted people to access the Internet, keep their credit card details secure, and take and archive pictures.

Cases

Touch Sight Camera

This Samsung design embosses 3D images on its flexible Braille display, turning images into a surface that can be felt. It also captures a few seconds of sound to accompany each picture, making them much easier to search and archive. Images can be shared online and downloaded to other Touch Sight cameras.

ReEnvision

Smooth touch-screen technology on debit card readers hinders visually impaired people by requiring them to give their PIN to the cashier. This design provides a low-cost solution, sitting flush on a debit card reader to provide tactile buttons.

Sentio

Although blind people can’t see, it doesn’t mean they don’t want to look good. This was Matthew Wagerfield’s approach when he incorporated tactile technology into this watch. The clock’s face features two seven-segment digital displays that rise 1mm above its surface, providing a tactile function for the blind and a visual spectacle for the sighted.

Saifu

Saifu is a tablet PC that uses a conceptual magnetized liquid material called magneclay. The oil based synthetic reacts to a magnetic charge, rearranging itself infinite numbers of times to display Braille or tactile 3D images in relief.

Trend Impact
These designs demonstrate many of the ways in which technology is making up for the difference in people’s abilities, leveling the playing field and making more activities and roles accessible to more parts of the population.

Of course, many of these technologies can provide benefits to sighted people. For example, a tactile surface could be applied to a bedside clock, enabling one half of a couple to find out what time it is without disturbing the other.

i’ll always have a soft spot for anything coming from savannah. savannah is the first city, other than my hometown, where i really felt at home, and it’s also the city where we’ll be getting married next year. so i was happy to hear from jessica at working class studio (a program where students design work for sale) about these cute new fabric-covered storage boxes. i always need a pretty place to keep things in order so these might need to be in my tiny mini-office some day. the boxes will be available december 1st so click here to pick one up when they’re officially for sale.

Again one of these posts I would have wished to have written myself ;-) Anyway I’ve skim read Kevin McCullagh’s posting on the Core77 Design Blog just before leaving to The Hague last week. Fortunately Kathryn Best reminded me on Kevin’s posting after my return a week ago!

What I like about Kevin’s post is his approach to assemble a sort of list of patterns he has observed when it comes to describing the term we love so much these days: ‘Design Leadership’. What I like in particular about ‘pattern recognition’ in general and this is also a reason why I like Kathryn’s book on Design Management is that it is not aiming for categories and definitions academia is looking after like: ‘right-wrong’, ‘good-bad’ or ‘truth’ in general.

While I will give my very own definition or better ‘description’ of the term later on I’d like to point to the four questions that have triggered Kevin’s article:

1.) What makes a design leader?

2.) Do they have to be designers?

3.) Who is leading whom?

4.) And to where exactly?

A point where I do disagree with him is clearly addressing question 2 as I don’t think that ‘Design Leaders’ necessarily need to be designers themselves. Let me try to explain this by referring back to the photo (or collage) I’ve assembled and which you see in the upper left corner. The picture in the lower right corner is taken from Kathryn’s book and illustrates quite well the three areas of responsibility of a Design Leader, a Design Manager and a Designer as those people in organisations who ‘Define a Vision’, ‘Manage the Process’ and ‘Create the Content’.

While on one hand I think that this ‘classification’ is helpful for better understanding the very often unclear terms I do think that on the other hand they are too discrete. Apparently a Designer or Design Manager can only remain in their category and won’t be able to embrace all of them at the same time. In contrast according to my understanding of a ‘Good Designer’ she/he must be able to address all those levels in order to ‘thoughtfully design’.

Therefore and in order to make the model more flexible I’d want to refer to one of the originators of the term ‘Design Thinking’ namely Roger Martin. You see his latest book ‘The Opposable Mind’ pictured in the upper left corner of the collage. Then replace ‘Design Leader’ with ‘Design Thinker’ and let ‘Design Leadership’ embrace all three functions ‘Design Thinking, Design Management and Design’ and you have a more flexible framework that communicates the key message: “Only if you’re good at all disciplines: ‘Thinking, Managing and Designing’ you are a ‘Design Leader’!

Accordingly this perspective also implies that one person will have a hard time to act as a ‘Design Leader’ since this would imply that all functions would need to be addressed by her/him alone. Even though for example the success of Apple Computer these days might appear as the single effort of Steve Jobs it is for sure the joint effort of many more (needless to mention Jonathan Ive).

Furthermore I do think that it is somehow anachronistic to believe that (in the competitive business landscape of these days) that individuals are still able to dominate; even though I admit that we tend to have a fascination for these sort of ’single heroes’.

Instead ‘Design Leadership’ according to my perspective above recognises that it is something that needs to be achieved collaboratively as a joint team effort of various ’specialists’. So the answer to Kevin’s question No. 2 definitely is: No, because only teams as I’ve described them above can effectively handle various functions from several disciplines with ‘Design Thinkers’ as the category most likely to embrace people from non-design disciplines.

What do you think? Is this something Kathryn/We shall adopt for the future?

To see complete inspiration library for MODERN WHITE view slide show
Today is a special October 12 - I share with you a MODERN INSPIRATION DEDICATION in honor of today's birthday. The birthday of a talented designer, artist, visonary, spirit and loving friend DONNA TOPPINGS.

marieke staps is dutch product designer who is the creator of the ‘soil lamp’. unlike most lights, staps’
uses free and environmentally friendly energy sourced from mud. the metabolism of biological life
produces enough electricity to burn the led light on the top. by adding a touch of water to the base of
the lamp, the natural life force in the dirt conducts electricity through copper and zinc, powering the
small bulb.

http://www.mariekestaps.nl

YouTube Contest Challenges Users To Make A 'Good' Video

Posted by Ed Cotton