If you find there is any copyright abuse, contact us as soon as possible, thanks.
London Design Festival: Designersblock Part 2
10/08/2008, 06:38 | MoCo Loco
Eggs were all the rage at Designersblock at Covent Garden, from fresh (Nosigner) to fried (Jaehyung Hong). Karen Ryan showed her versatility from eclectic chairs to colourful, umbrella-sized lights. Lucky Candles from Maria Gil Ulldemolins showed us a trick or two about aging, and the Biodegradable 100 Prayer Pots by Mingyu Jeung & Misun Kong contain handwritten wishes that go back to the earth. Kyeok Kim exhibited rings carved from soap, and Nic Wallenberg's lighting was configured in just one of many ways.
London Design Festival: New Designers Selection
10/07/2008, 12:54 | MoCo Loco
The New Designers SELECTION was an exhibition of work by 50 young designers who were selected from the New Designers event in July. Held at the Village Underground in Shoreditch, this show featured a variety of furniture, jewellery, accessories and lighting. There were colourful (and cheeky) ceramics from Michelle Wood, a salute to the monarchy by Faye Power, and intricate work from Rebecca Smye-Rumsby. Elena Fleury-Rojo's glass pieces were a combination of frost and shine, and Rachel Postlethwaite's layered cubbies provided unusual modular shelving options. More after the jump, along with work from Lizzie Thomas, Katie Merrick and Mira Horn.
London Design Festival: Piet Hein Eek
10/05/2008, 23:25 | MoCo Loco
The London Design Festival saw the launch of the first Rabih Hage/Piet Hein Eek pop-up store in a space large enough to highlight a wide variety of Eek's work. The temporary shop will be open through October 31 and features Eek's new 99% cabinets, storage that makes use of 99.13% of a whole steel sheet (the waste is a result of the holes for the fasteners). There was a nice selection of signature Waste Scrapwood pieces, all a glorious, yet soothing, patchwork of colours. The Plywood Chandelier and Plissélamp were good examples of Piet Hein Eek lighting, and the ceramics range caught the sun on the tables. The Crisis Cushion Sofa beckoned softly from a corner, and the Plywood dining set showed up well in the space.
heineken the city concept shop by tjep
00/00/0000, 00:00 | designboom weblog, design related news, reviews and previews
dutch designers frank tjepkema, janneke hooymans, tina stieger and leonie janssen were commissioned
by the dutch beer maker heineken to design their first shop. the studio at tjep settled on a theme of pouring,
translating the idea into displays the blend from floor to wall to ceiling, in wave-like forms. a sub-theme for
the retail outlet was coldness. this theme can be spotted in the cool colours and 100% led lighting system.
coldness is also literally seen in the three- story fridge that holds heineken bottles form around the world.
the store is divided into four sections, the aforementioned fridge, a fashion department, a ticket and travel
section and a fully equipped recording studio for young music artists.
http://www.tjep.com
via archdaily
holiday fair map
00/00/0000, 00:00 | Design*Sponge
these maps are by uk artist chris kenny. i think they are stunning. the detail blows me away. i made a google map with the fairs i covered this week (+ others that were mentioned in the comments and emails i received.) this map is open to be edited by anyone, so go ahead and add fairs from your area to it. (you need a google account to add fairs to the map but anyone can view it.)
i’d like to thank grace for having me here in this space. highlighting these fairs, artist’s & diy projects has been such a thrill. my aim in promoting these fairs has been to encourage people to check out their local holiday fairs for your gift buying needs. these events are really fun to attend. usually there is music, food, sometimes workshops, and of course truly unique holiday gifts. these tough economic times are forcing everyone to cut costs this holiday season. i believe supporting your local economy, and artists is always a good place to put your money + there are always some incredible deals to be had at these shows. this season if you’re in the chicago/milwaukee area i’ll be selling here, here, and here. stop by and say hi. i love meeting people at these fairs because i’m usually holed up in my studio all day chatting with my cat (no joke). for more info about what i do you can check out my shop, blog & flickr. happy holidays!
The Enertia House
00/00/0000, 00:00 | Green Home Building and Sustainable ArchitectureThe Mother Earth News editor said that these homes had been featured in their magazine before. They essentially provide two wooden shells for the home, one inside the other. She said that there was no mention in the article about the cost per square foot. She was wondering what I thought about the concept from the standpoint of sustainable architecture.
Here is my response:
Double envelope house designs have been around for several decades and they definitely offer some benefits, as well as raise some questions. Any house that takes advantage of the geothermal properties of the ground will be doing its inhabitants and the earth a good turn. This can take the form of earth-sheltering in general, or some clever system of circulating air like the Enertia concept; coupled with sensible passive solar design, it is possible to approach a "zero energy" home.
The concerns about their system that I have are: The use of wood as the primary building material is not generally sustainable in this day of lost forests. With the double envelope design, you are practically building two houses to end up with one. Relying on wood as a thermal mass material compromises the potential thermal performance because wood does not serve this function nearly as well as traditional masonry thermal mass materials. So, I guess what I am saying is that a more sustainable and less costly design can be accomplished in more traditional ways.
Clark Snell of www.thinkgreenbuilding.com wrote, "I spent five minutes looking over the web site, so these comments are only based at looking at marketing materials, i.e. they may be inaccurate. Ditto what has been said so far. A couple more “red flags:”
- Solid wood envelope. They seem to be using the old “mass enhanced R-value” argument for why solid wood walls perform well thermally. I think it’s well established that this is true only in very specific climatic situations. Touting solid southern yellow pine walls in comparison to solid white pine walls is like saying a Chevy Suburban gets better gas mileage than a Hummer…that’s not really a useful statistic.
- Energy without oil. The presentation intimates that this is a completely passive design. For example, no heating system is mentioned. That simply isn’t credible for most climates using the technology they are describing.
- Passive means local. You simply can’t create a design that relies heavily on passive techniques and generalize it across climates. In my area where we have high humidity, I’d wonder about this convective loop through the attic and basement, for example.
I could go on. I’m a passive design freak, so I’m all for the basic concepts they are dealing with. However, I don’t see anything really new here, but see marketing claims touting what they are doing as a major breakthrough and “the answer”. That always makes me nervous."
David Eisenberg, of www.dcat.net wrote, "After a skimming around their website, I see that they sell kits and their base prices don't include a lot of things - some of which are enumerated:
That's a pricey list of not includeds and notice they say nothing here and I saw nothing in my quick scan of the site about some really big and typical costs like excavation and foundations, below grade walls, or basement floor. They say this is a structural package but they don't mention all the things that are going to be extra that most people would expect in a house - plumbing, wiring, fixtures (electrical and plumbing), stove, etc. and especially that the solar PV and thermal water heating systems are not part of the package. It would be nice if they said right up front and clearly what they do and don't sell. And they should make it very clear that all the prices include only the factory labor, not the cost of actually assembling and finishing these structures.
But the biggest issue I have is that these are essentially double wall structures using an enormous amount of thick, milled lumber, which appears to use many times more wood than goes into a stick frame house. It would be interesting to see if they use more wood than a comparable log home. They'll likely be more energy efficient than a log home, but they'll use as much or more wood. Which raises all sorts of issues about the sustainability of this venture - beyond just the trees cut down - much bigger transportation, milling, probably kiln drying impacts as well. The concept is fine and likely works reasonably well in most climates. I'd need to see much more actual performance data and of course real cost data to be able to make any kind of realistic judgment of the viability of this concept as anything more than a niche market system. But between the costs which are going to be very high and the amount of materials going into one of these, calling it sustainable seems like a real stretch."
And finally, Jeff Judkoff of the National Renewable Energy Laboratory, wrote: "The concept of "Double Envelope" homes has been around since at least the 1970's. A number of them were built in the late 70's early 80's. Some variations of the concept were published in the Solar Home Book, by Bruce Anderson and Michael Riordan in 1976, Cheshire Books. Other publications in that time frame also showed the concept. The only truly new concept here is the notion that the resins in the wood behave as phase change storage materials. I have no idea if that is true, but I doubt it because the most common phase change is from a solid to a liquid, in which case the resins in their liquid phase would leak out creating a mess. That's not to rule out the possibility that some tree resins could go from a solid to semi-solid phase, or that they are encapsulated in the wood, I just don't know if they can, and would only be able to determine it through controlled scientific testing in a calorimetry chamber. Phase change storage can really be a big boost to the performance of many flavors of passively heated and cooled homes.
There are many ways to acheive highly efficient homes that more or less "heat and cool" themselves. Different approaches have different costs and will work better in some climates than in others. In Colorado, my lab, NREL, worked with Habitat for Humanity to create a net energy producing home. We used super insulation, passive solar tempering, ventilation heat recovery, engineered shading, solar hot water with a backup instantaneous water heater, compact flourescent lighting, and PV. We also have more than a years worth of detailed data to prove the performance of the home (it really was a net energy producer for the last year).
I saw no data to indicate how well the Enertia home actually performed from an energy perspective. Cost, energy performance, and comfort are the key criteria by which to evaluate such homes, and data is always better than arm waving, or catchy theories. Nothing beats the scientific method for objectively determining the value of an idea."
MODERN HOMES - MAJORCA + SINGAPORE + LONDON
00/00/0000, 00:00 | GAILE GUEVARA
Images provided by SHOOTFACTORY
View the complete inspiration library of images as a slideshow
Thanks to amazing blogs out there like one of my new favorites by Justin Anthony of materialicious he shares with readers his amazing sources on residential architecture, design, craftsmanship, materials and products. An excellent resource. Featured on one of his articles is an amazing company SHOOTFACTORY based out of the UK. "shootfactory is a full-service location agency, representing UK and international properties, studios and venues for TV, film, photo shoots, product launches and events. With over ten years’ international experience in our respective arenas of photography, styling, location management and production, we are committed to providing our location owners and clients with the best service, advice and support." Shootfactory is great option for clients to consider to turn their vacation properties into a source of income while not in use.
Here are a few examples of the many amazing interiors Shootfactory features. My top cities for modern inspiration MALORCA + SINGAPORE + LONDON.
MAJORCA - "Modern lifestyle studio in SE Mallorca (Majorca). Superb daylight. Open plan. Internal and external studio spaces. Props and lighting."
Tom Kundig's Sublime House - "The Brain"
00/00/0000, 00:00 | FUTURE HOUSE NOW
I resisted buying the book, though I'd really like to have it. It's very nice and Kundig's work is amazing. The house on the cover, Chicken Point Cabin, has been shown everywhere, and for good reason. It's pretty spectacular, and that giant, tilting window and the unusual mechanical folly for opening it are sublime.
Visiting the OSKA site, I found that the house I liked most wasn't one of the groovy cabins I'd spotted in a lot of the blogs and architecture mags. I was taken by the "The Brain," a fascinating concrete monolith built for a filmmaker.
That's wonderful. I love the way the house rests on its site, half hidden, with creeping vines growing all over it. I hate big ugly garages hanging off the side of a house, parasitic, distorting proportions, so I was delighted to see this house with the garages tucked neatly underneath, buried into the slope of the landscape. No yard either - excellent!
"The form is essentially a cast-in-place concrete box, intended to be a strong yet neutral background that provides complete flexibility to adapt the space at will." - OSKA site
The austere concrete exterior belies a more playful space inside: wonderful bookshelves (just look at 'em!), interesting lighting, a fireman's pole, and an amusing custom staircase.
Yes, this is a house I can see myself living in. The only exception I take with it, and with most Kundig houses frankly, is that they all look like bachelor pads. I'm married with children. But I think the wife and kids could adapt. Who wouldn't want to live in a house with a fireman's pole?
_____________________________________________________
Addendum:
I should have pointed out this very good Seattle Times article about "The Brain." I've realized since writing this post that "The Brain" is a garage/studio, not intended to be a residence. Thanks to those who left comments pointing that out. It is also worth noting that Kundig received an AIA award for "The Brain" in 2004.
Oh well, even though it's not technically a house I'm still very inspired by it!
Image credits - Amazon listing (book), OSKA Architects site
Thank You Design Public!
00/00/0000, 00:00 | FUTURE HOUSE NOWWe wanted something modern and cool, and a little more substantial than a regular "kids bed." There are a lot of neat beds on the market but the modern offerings tend to be really pricey and are too often the kind of thing that will look silly in your kids' rooms by the time they're ten. My wife and I finally settled on a pair of these great-looking platform beds from TrueModern. They cost more than we wanted to pay, but were priced reasonably compared to a lot of other modern offerings on the market (many not as nice), and I think they look great, look well made, and will last the kids a long while.
Now, you can get these from a lot of places but for whatever reason we ordered ours from Design Public. I'd never bought anything from them before, but I'm one of those people who shops online a lot and it's not a really big deal for me to try a place completely new, even for a big purchase - throw caution to the wind, reckless abandon, all that jazz. I really don't recall why I picked them for my order.
So anyway, the beds get ordered, it takes about two weeks for them to ship, and then I get the call from the freight company who will deliver them. Long story short, there is a problem, possibly some confusion, and I am concerned about it. The problem was the freight company, not Design Public or TrueModern, but rather than tackle it solo I decide to call Design Public for help.
I must say, I was absolutely impressed by the extremely friendly and helpful response. I won't get into the details, but I thought that the Design Public staff went above and beyond the call of duty in helping me. I spoke to Jonathan, who was unfailingly courteous and diligent in his follow-up on my issue. I felt like they really cared, that I was valued as a customer, and that Design Public genuinely wanted to take care of me. It was really nice!
Like I said, I shop online a lot without giving it much thought. And I guess I've learned not to expect too much. But really, I thought Design Public were wonderful to deal with. If you want some really cool modern stuff, check out their site. It is loaded with amazing furniture, accessories, lighting, gifts, etc. - you name it. Very nice. It's a small company that's really living up to its mission. I was totally impressed.
Bravo and thanks!
Image credit - Design Public site
Luminescent Fiber Optic Wallpaper by Camilla Diedrich
00/00/0000, 00:00 | Inhabitat
What if we could light our homes with glowing wallpaper rather than having to rely on electric lights? Swedish designer Camilla Diedrich has asked this exact question, and in response, created a stunning line of luminescent wallpaper that is lit by fiber optics. Her Nature Ray Charles Wallpaper features a delicate assortment of floral motifs that shine through in lucid lines, adding a touch of energy-efficient ambiance to any room.
Frederico Zanelato - Casa Martins Siquiera
00/00/0000, 00:00 | Modern Residential Design
A True Weekend Retreat - Ferederico Zanelato's own house no doubt paved the way for the design of this marvellous family home near São Paulo. Maximising the slope of the plot, this house spreads living over three levels in three distinct zones.
Overview
The embracing the views of the Serra do Japi was the "be all" and "end all" of this build.
Frederico wanted a house that stimulates discussion, where spaces are integrated and connected to each other, as well as the surrounding plot. Conveniently the plot is well orientated to minimise the suns impact on the residence, and thus the requirements of air conditioning. Frederico's skills at minimising materials and specifying kept this build in economical proportions as well. Total construction cost $510US/m².
Lot
Located in a condominium between Jundiaí and Itupeva, 60km from São Paulo, 1000m², with a mild slope and a fantastic views of the Serra do Japi.
The client
A happy young couple with two children, a child and an adolescent and many friends. They wanted a home for the weekends, a place for unforgettable moments, for parties, to receive guests, relax and create. As an advertising director and businesswoman, respectively, the husband and wife team are usually based in São Paulo, and required a "retreat" from the hustle and bustle.
Following the topography of land and its geographical position, the house was designed in three blocks; intimate, social, and service, linked by an elongated circulation area of three distinct levels.
A single open plan wing for the living room, dining and kitchen is connected by a hallway to the rear block of two levels.
To the left of the hallway: two storeys and 4 bedrooms. To the right: the services/utility area and above, private office.
Access to the home is through a wooded avenue. The façade clearly indicates two blocks separated by a large panel of wood, the main door, which when opened, mimics the tree lined avenue. Up lighting is used to create sensations and justify the texture of materials in the entrance way.
Just inside the entrance are doors leading to two of the four bedrooms and stairs to the second level. Both levels overlooking the central courtyard or "birds square" as the owners refer to it. Wooden shutters afford shade and further privacy to these rooms, breaking the white façade nicely and distinguishing the two areas.
This courtyard receives morning sun and cross ventilation through strategic openings, making it a year round pleasant breakfast spot.
Passing the courtyard on your left as you head away from the entrance, you arrive at the social wing. Pleasantly shaded, overlooking the pool, a leisure area and further behind, views to the Sierra Japi.
Here, kitchen, dining and living room intertwine. It’s position between the "birds square" and the swimming pool area is strategic, for coexistence and as a buffer between the two zones: repose and action. The "birds square" works as a further filter between the social and private wings and creates an open intimate space.
The outdoor rooms, or BBQ area, is located in the largest free area of the plot. It too is open to those views that inspired the choice of the land: the Serra do Japi.
Half way to the second level bedrooms, the circulation area opens to a roof deck over the living area. Used as a mini-golf course, the deck is also the only access to the owners workshop and hidden office, which is above the service wing.
The choice of materials was defined according to the function of each area obeying the basic rules of environmental comfort and wishes of this family.
The Result
A house zoned into three distinct areas, each buffered from the other by the outdoors that allows for private retreat or very social entertaining.
Plans
Architect: Frederico Zanelato
Co-authors: Marcelo Miua and Fernanda Kano
Student: Regina Sesoko
Structures: Vagner Garcia de Oliveira
Photos: Bebete Viégas
Completed: 2007
Costs: $510 US/m²
Information courtesy of: Frederico Zanelato
creative exchange by 5th studio
00/00/0000, 00:00 | designboom weblog, design related news, reviews and previews
creative exchange is a new shared workspace complex designed by 5th studio in cambridge, england.
the project was publicly funded and designed for the areas creative workers and innovators. the building
is designed as a studio not an office, with enough room for 14 different companies. the ground floor is
adaptable, making it suitable for meetings, exhibits and other events. the first and second floors house
the private workspaces. the architects left wide common areas on these floors to encourage cross
pollination. above all this is a working garden to further encourage interaction. the building design was
also designed for optimal sustainability, using exposed concrete for thermal mass, natural ventilation
and cooling systems and large windows for minimal need for artificial lighting.
http://www.5thstudio.co.uk
photography by tim soar
Arkhefield - Couran Point House
00/00/0000, 00:00 | Modern Residential Design
Island retreat - The team at Arkhefield bring us one of their latest residential wonders in form of a simple, low maintenance, sustainable living volume which can be enjoyed all year round. The motives behind the design - maximising space and privacy - are attacked head on, as are the isolation and harsh climatic conditions on the island with basic low maintenance materials. The resulting simplistic structure, appears as a coastal tree, with its roof-line shaped by the strong winds and elements. Elements from which it can hunker down further, shelter, isolate and reorientate the use of external spaces.
Overview
The house offers a stark contrast to the predominant low shacks by the way that it expresses and celebrates volume, simplicity of form and its ability to manage/manipulate the external environment. The house appears to be inspirational amongst the community with many new houses currently under construction on the island being designed and sited in a similar manner. 
The house is a simple extruded profile with its form being solely dictated by town planning constraints. Height, setback and roof pitch essentially created the volumetric section which was extruded to the road and waterfront boundary, then set back to maximize the enclosed space. The house breaks out onto the terraced waterfront on the east, for summer fun and to an enclosed "winter courtyard" on the west. The relatively closed north and south façades retain privacy from the adjacent blocks, and shelter from strong summer sun. 
Design
The isolation of the site put a premium on the construction cost as all materials and skilled labour had to be barged out to the island. These constraints created unique challenges and encouraged a rethink to heavy/bulky build elements that couldn't be barged out to the site. Environmentally Sustainable Design principles of orientation and sitting along with use of solar, gas, rainwater harvesting, bamboo cladding/screening and a thermally efficient monolithic floor slab were all core ideas behind the build.
Layout
The house is split in half down the centre of its length with a large double volume "communal" living space on the north and a 2 level "private" core, comprising of bedrooms and service zones, on the south. The interplay between the two halves of the house creates a sense of inclusion and encourages interaction between family and guests whilst still enabling privacy and seclusion.
Our clients desire to recreate a "Bahaman" styled beach cottage with shingled, pitched, roof and quaint shuttered windows made for a challenging brief. They wanted the house to take them back to the memorable vacations they had spent in exotic locations. Through exploration and development it became evident that decoration and themed architecture may enable brief relapses into the bygone but that intelligent design and the creation of flexible spaces stimulated communal interaction, which was what really recreated that relaxed holiday atmosphere they were seeking. They are extremely happy and are enjoying there "Contemporary Bahaman" cottage which they have aptly named "the shed" out on Stradbrooke Island.
Results
The team at Arkhefield have managed to strip back this brief to the real essence of what the client was after. Conviviality and family togetherness were the clients true request and the flexibility of the hoses and its communal spaces are what makes the house such a wonderful island retreat.
Plans
Architect: Arkhefield [AF employees] - Director, Andrew Gutteridge
Project/Design Architect: Simon Wynn
Project Team: Justin Boland, Julie Tomaszewski
Building Surveyor: Bennett & Francis
Construction completed: July 2006
Hydraulic: BRW Enterprises
Interior Designer: Arkhefield
Landscape: JW Concepts
Lighting: Arkhefield
Structural: McVeigh Consulting Engineers / Steel House Frames Australia
Structure and Frame: Steel House Frames Australia
Builder: Clarke Construction (Kelwyn Cassidy, Steven Parker)
Gross floor area: 355 m2
Project cost per square metre: Client wishes this to be kept confidential
Photography: Scott Burrows
via: Arkhefield
Studio di Architettura Marco Castelletti - Casa del Masso
00/00/0000, 00:00 | Modern Residential DesignStudio di Architettura Marco Castelletti
Razionalismo Comasco - A near vertical site in Como, with stunning views, let Marco Castelletti nod to local Italian architecture of the thirties, whilst bringing his clients a modernist house, proportioned and segmented with precision.
Overview
"At the end of 2002 the clients approached us to design the house.
They wanted to build this new house next to their one, in the garden facing the lake, and they were after something typically razionalismo comasco, architecture of the thirties driven by architect Giuseppe Terragni. So they chose the project that best met their expectations, ours. The project's main idea gave the name to the building: casa del masso." Marco Castelletti.
The house, set on a steep slope above the street, can be clearly seen across the lake.
The building stands by the side of the client's old house designed by engineer Luciano Trolli in 1955, and it takes advantage of a little tract of flat land, as does the original residence.
The house is linked to the street by a long flight of steps which wind along the slope and down to the house, which is organised over two floors.
Layout
The composition is based on the intersection of two volumes:
The first - facing the lake, is an horizontal structure supported by pilotis houseing all the living and bedrooms.
The second - is vertical holding the staicase and the services rooms.
On the first floor the living room crosses the house and is directly connected with the slope behind. Here the presence of a erratic boulder, in italian language "masso" (here is where the name of the house comes), protrudes into the dwelling as the characterising element of the space, so that it seems that the house is anchored to the slope at this point.
The boulder can be seen through the glass floor of the living room.
From the parking area you reach the main entrance via a flight of steps or an elevator running on the side of the garden.
After reaching the main entrance a footpath covered by a overhanging volume introduces a little hall where you can see the landscape and the monuments of the city.
From here, a large staircase takes you to an atrium with the large glass window which frames the erratic boulder. The internal layout of the main dwelling faces the kitchen, the living room and some other rooms towards the lake, while bathrooms, services and the laundry are put towards the slope.
The materials used to build the house enhance the volumetric composition and the difference between the horizontal volume, suspended and completely covered by white marble dust plaster, and the vertical covered with a natural stone called Iragna, laid down in horizontal layers with different length and thickness.
The same stone was used for the external pavements, the main entrance staircase and the terrace floor on the highest level.
The large windows are divided in sliding parts with electrical rolling shutters made of aluminium.
Solar exposure is optimised wit hteh building orientated with its largest windows and rooms to the south, and services and bathrooms facing north.
ResultsThe clients were really satisfied of the project and followed all the phases of the building that, because of the particular nature of the steep land, involved many challenges.
The crane to build the house was placed on the slope with an helicopter used to transport heavy weights. None the less, the house was completed in seventeen months, from May 2003 to December 2004, as stipulated.
Slideshow
Architect Marco Castelletti Architetto
Short Biography
Marco Castelletti, born in 1958, graduaded from the Facolty of Architecture in Genova on 1983.
In 1994, 1999, 2001, 2003 and 2005 was awarded the architecture’ s award “Magistri Comacini” for works carried out in Provincia of Como and in 2004 the international award AR+D for emerging architecture in London.
In the spring of 2005 he was invited to give a lecture at the Royal Institute of British Architects in London.
He won many competitions for urban renewals in north Italy, as the upgrading of the Trieste waterfront, and from 1998 he has been invited to international competitions.
Project location Como Italy
Client private owners
Architectural design by Studio di Architettura Marco Castelletti
Interior design by Studio di Architettura Marco Castelletti
Landscape design by Studio di Architettura Marco Castelletti
Structural design by Ingeneer. Vittorio Montanini
HVAC design by Ingeneer. Vittorio Montanini
Lighting design by. Zumtobel
Main Contractor Impresa Biacchi s.a.s. – Plesio (Co)
Landscape contractor Impresa Biacchi s.a.s. – Plesio (Co)
Site Area 3000 sq/mt
Built up area 200 sq/mt
Budget 750.000,00 euro
Cost per sq. metre 1.800,00 euro
Google Location
Plans
via: Studio di Architettura Marco Castelletti
MODERN OUTDOOR FURNITURE - PART 3
00/00/0000, 00:00 | GAILE GUEVARA
California's Green Building Code
00/00/0000, 00:00 | Green Home Building and Sustainable ArchitectureThese new codes include basic passive solar mandates: "When site and location permit, orient the building with the long sides facing north and south. Provide exterior shade for south-facing windows during the peak cooling season. Provide vertical shading against direct solar gain and glare due to low altitude sun angles for east- and west-facing windows."
For renewable energy, the codes says, "Use on-site renewable energy sources such as solar, wind, geothermal, low-impact hydro, biomass and bio-gas for at least 1% of the electric power."
For water conservation, the code says, "A schedule of plumbing fixtures and fixture fittings will reduce the overall use of potable water within the building by 20%, and provide water efficient landscape irrigation design that reduces by 50% the use of potable water beyond the initial requirements for plant installation and establishment."
"Each building shall further reduce the generation of wastewater by one of the following methods: The installation of water-conserving fixtures (water closets, urinals) or utilizing non-potable water systems (captured rainwater, graywater, and municipally treated wastewater
(recycled water)."
For materials to be specified for construction, the following is mandated:
- Select building materials or products for permanent installation on the project that have been harvested or manufactured in California or within 500 miles of the project site.
- Select bio-based building materials and products made from solid wood, engineered wood, bamboo, wool, cotton, cork, straw, natural fibers, products made from crops (soy-based, corn-based) and other bio-based materials with at least 50% bio-based content.
- Employ wood-based materials and products comprising at least 50% of a major building component, such as framing, flooring, or millwork, which are certified by one of five listed sustainably harvested certification programs.
- Use materials made from plants harvested within a ten-year cycle for at least 2.5% of total materials value, based on estimated cost.
- Use salvaged, refurbished, refinished, or reused materials for a minimum of 5% of the total value, based on estimated cost of materials on the project.
- Use materials, equivalent in performance to virgin materials, with post-consumer or preconsumer recycled content value (RCV) for a minimum of 10% of the total value, based on estimated cost of materials on the project.
- Use cement and concrete made with recycled products, fly ash, raw or calcined natural pozzolan, blast furnace slag (as a lightweight aggregate) .
- Select materials for longevity and minimal deterioration under conditions of use.
- Select materials that require little, if any, finishing.
- Select materials that can be re-used or recycled at the end of their service life in the project.
- Select materials assemblies based on life cycle assessment of their embodied energy and/or green house gas emission potentials.
Environmental and health-related items establish specific limits on VOC emission of materials used within the structure, as well as regulate ventilation, CO2 emissions, tobacco smoke, lighting, outside views, and noise transmission.
Additional recommended measures include:
- If feasible, disassemble existing buildings instead of demolishing to allow reuse or recycling of building materials.
- Utilize a Frost-Protected Shallow Foundation.
- Use pre-manufactured floor and roof systems to eliminate solid sawn lumber whenever possible.
I have been advocating most of these measures at www.greenhomebuilding.com for many years now, and it is heartening to see them being officially sanctioned. This is a far-reaching and well-considered attempt by California legislators to establish requisites for living sustainably. If there are going to be building codes, they might as well be green! Yeah California!
tokyo design week 08: rie yagura at claska hotel
00/00/0000, 00:00 | designboom weblog, design related news, reviews and previews
yagura uses the handle from a foose ball table as a handle for a wall lamp
image © designboom
this year was the claska hotel's first year participating in design tide tokyo. selected designers were invited to
design guest rooms for the claska as part of the event, including rie yagura. she presented a collection of
furniture designs, focusing on lighting. she takes mundane objects that are significant to her, assembling them in
different ways. through her work she integrates aspects of western culture with her native japanese heritage.
bottles typically used to hold household chemicals or cleaners are now transformed into bases for table lamps
image © designboom
the form of a detergent bottle used as a lamp base
image © designboom
using fabric, rie creates lampshades which look like drooping flowers
image © designboom
delicate fabrics are used as lamp shades
image © designboom
the warm glow from within the fabric lampshade
image © designboom
drawing from the form of a high tension insulator, rie produces indoor lamps
image © designboom
worms of lint-like material are intertwined and pressed together to form a stool
image © designboom
more
rie yagura: http://www.mademoiselle-y.com
claska hotel: http://www.claska.com
design tide tokyo: http://www.designtide.jp
tokyo design week 08: idesign
00/00/0000, 00:00 | designboom weblog, design related news, reviews and previews
'light, light'
image © designboom
japanese company idesign created 'light, light' a table lamp that doesn't need a light bulb.
by using an electro luminescene sheet, produced by elfin as a light source they have created
this new type of lighting. it is also thin, lightweight and generates very little heat.
image © designboom
image © designboom
'light, light' illuminated
more:
http://www.elfin.jp